Basic EIGRP Configuration

September 11, 2017 Sean 0

ip routing router eigrp 10 eigrp router-id 172.16.1.1 network 0.0.0.0 passive-interface default no passive-interface vlan 10 no passive-interface vlan 20 redistribute static Adjusting metrics (to […]

Basic OSPF Configuration

September 11, 2017 Sean 0

ip routing router ospf 1 router-id 172.16.1.1 network 10.1.1.0 0.0.0.255 area 0 network 10.1.2.0 0.0.0 255 area 1 passive-interface default no passive-interface vlan 10 no […]

Basic EtherChannel Configuration

September 9, 2017 Sean 0

Configure channel-group on interfaces first. Then complete interface configuration on port-channel. LACP Switch1 and Switch2 int range gi0/1-2 channel-group 1 mode active or Switch1 int […]

Basic Spanning-Tree Configuration

September 8, 2017 Sean 0

Default priority = 32,768 Lower priority is more desirable. Switch1 spanning-tree vlan 10 priority 0 spanning-tree vlan 11 priority 4096 Switch2 spanning-tree vlan 10 priority […]

Basic VTP Configuration

September 7, 2017 Sean 0

VLAN Trunking Protocol only works on trunks. If you aren’t getting vlan information as expected, verify links are trunks. Modes: Server, Client, Transparent, OFF Server: […]

Cisco AP 3800 Series LED Status

July 22, 2017 Sean 0

Message Type Status LED Message Meaning Association status Green Normal operating condition, but no wireless client associated Blue Normal operating condition, at least one wireless […]

Cisco AP 3700 Series LED Status

July 22, 2017 Sean 0

Message Type Status LED Message Meaning Boot loader status sequence Blinking Green DRAM memory in progress DRAM memory test OK Board initialization in progress Initializing […]